4 piece hole protector set

Itsa me! Mario!

Super Mario Brothers - the pinball - is not just cute but is actually a fun and challenging game! One thing Gottlieb did differently from all other pinball makers is make their scoops as huge holes. This meant protectors would be a huge challenge as well. Thatsa lotsa metal!  These scoop holes take quite a beating but thanks to John Tarbox's help we've got 'em covered! I also need to thank Kevin Riekki and Kevin Ragsdale for pics!

Here are some pics showing some common wear at the scoop holes. When they are as badly worn as some of these you will need to fix the damage with epoxy putty.
           

      The 4 piece playfield hole protector set! Now in carbon fiber too- cant warp!

Let's take a look fitted to John's playfields...

            John's NOS playfield - protected!

            John also sent his populated upper mini playfield. Thanks, John! It looks fantastic now especially with my blue post sleeves :)

To install- First use the included alcohol wipe to clean and dewax the area around the scoop. Remove plastics, posts and deflectors.
Peel backing from 3M adhesive strips, carefully align protector over hole. Press/rub down hard on the protector to activate adhesive strip.
Reinstall posts and deflectors taking care not to overtighten and cause warpage. Install plastics. Done!

Only $60 for the complete protection set. Click HERE to order yours! (will open your system default email program)
Shipping cost not included. Ships USPS first class or GlobalPost
California residents must add sales tax